The script will then ask you for a
The script will then ask you for a “syscontact”, the person responsible for the system. If you have multiple server administrators, this is an excellent place to put the email address of the person who should be contacted regarding problems or issues. You might also put in an alias that forwards to multiple people, so that you don’t have to reconfigure snmpd when your contact person leaves or is reassigned. ………………………………………………………………………………………. Do you want to properly set the value of the sysServices.0 OID? (default = y): ………………………………………………………………………………………. Yes, you do. This section describes extremely basic properties of the system, but not ones that accept a “y” or “n” answer. Because you’ll be filling in actual values to be used in the SNMP configuration, you’ll enter 0 for no and 1 for yes. ………………………………………………………………………………………. Configuring: sysservices Description: The proper value for the sysServices object. arguments: sysservices_number does this host offer physical services (eg, like a repeater) [answer 0 or 1]: ………………………………………………………………………………………. Some people have telco cards for FreeBSD that allow them to hook a standard x86 PC into a telephone switch to handle phone-company-level operations. If you’re not one of them, enter 0 for the preceding question. ………………………………………………………………………………………. does this host offer datalink/subnetwork services (eg, like a bridge): ………………………………………………………………………………………. FreeBSD can be configured as a bridge, but if you haven’t done so, answer 0. ………………………………………………………………………………………. does this host offer internet services (eg, supports IP): 1 does this host offer end-to-end services (eg, supports TCP): 1 does this host offer application services (eg, supports SMTP): 1 ………………………………………………………………………………………. Answer 1 to all of the three preceding questions. A FreeBSD Internet server supports them all. ………………………………………………………………………………………. ************************************** *** BEGINNING ACCESS CONTROL SETUP *** ************************************** Do you want to configure the agent’s access control? (default = y): ………………………………………………………………………………………. You don’t want just anyone to be able to access your system, so answer y. ………………………………………………………………………………………. Do you want to allow SNMPv3 read-write user based access (default = y): 438
Note: If you are looking for good and high quality web space to host and run your application check Lunarwebhost Cheap Web Hosting services